home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.networking
- Message-ID: <36883612@arkon.dontpanic.sub.org>
- From: crest@arkon.dontpanic.sub.org (Klaus Burkert)
- Path: nordwest.pop.de!cosmos-l.gun.de
- Subject: Re: Amigas - Novell Netware 4...how?
- Date: Sun, 25 Feb 1996 00:43:58 +0100
- X-Mailer: UMSZer V2.22 public
- References: <150563@cup.portal.com>
- X-Gateway: ZCONNECT cosmos-l.gun.de [UNIX/Connect v0.74b]
- MIME-Version: 1.0
- Content-Type: text/plain; charset=ISO-8859-1
- Content-Transfer-Encoding: 8bit
-
- In article <150563@cup.portal.com> <mikemasquith@cup.portal.com> wrote:
- > Client Software (ACS) by Oxxi. Anyone have any advice? Where can I get ACS?
-
- I don't know for the US, in Germany a company called "Casablanca" sells it.
-
- > Will it work on Netware 4?
-
- I have/had it succesfully running with Netware 2.15, 3.11 and 3.12.
- I've heard it should run with 4.x too, but I haven't checked it by
- myself yet.
-
- >I was told by a tech support guy at CEI that Oxxi is no longer
- >developing ACS & only the CBM 2065 supports it...
-
- AFAIK, Oxxi is still selling it, although development seems to be halted.
- They support the A2065, Hydra, and Ameristar board (not sure of other) in
- a "bang-the-hardware" manner, thet means while using ACS you can't use
- any other protocol (envoy, TCP, ...) on the same board at the same time.
- The Ariadne is supported at SANAII level, that means you can use ACS and
- other protocols simultaeneously. I have ACS, AmiTCP, Envoy and Ethertalk
- (A-Max, ShapeShifter) running simultaneously in the office and right on
- this machine at home.
-
- Ciao, Klaus.
-